|
|
Galvanized Steel Tripods
CM6
Tripod and Grounding Kit (6 ft)
Features
- Six-foot measurement height
- Support for meteorological sensors, hydrological sensors, sensor mounts, solar panels,
environmental enclosures
- Portable instrument mount
- Individually adjustable legs
- Lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes,
and UV-resistant cable ties included
- Optional guy kit available for wind loading
CM10
Tripod and Grounding Kit (10 ft)
Features
- Ten-foot measurement height
- Support for meteorological sensors, hydrological sensors, sensor mounts, solar panels,
environmental enclosures
- Portable instrument mount
- Individually adjustable legs
- Lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes,
and UV-resistant cable ties included
- Optional guy kit available for wind loading
L10844
Tripod Guy Kit for CM10
The CM10 Tripod Supports measurement heights up to 10 feet (3 meters). Provides
support for attached sensors and mounts, solar panels, and environmental instrumentation
enclosures. The tripod legs are individually adjustable allowing the measurement
heights of wind sets to be adjusted, and to accommodate tripod installation over
uneven terrain. An optional L10844 Guy Kit is available for installations
that may experience high wind speeds.
The L10844 CM10 Tripod Guy Kit includes:
- (3) Turnbuckles
- (1) Top plate
- (3) Bottom plate
- (6) Thimbles
- (12) U-bolt clips
- (3) 12 ft guy wires
Stainless Steel Tripods
- 019ALU:Aluminium Crossarm Sensor Mount
- C1737:Antenna Mount Kit (for antennas
with magnetic bases)
- C2011:Aluminum Pipe, 1 Inch x 10 Inch
(cut only, no thread, no bevel)
- CM110:Stainless Steel Tripod and Grounding
Kit (10 ft)
- CM115:Stainless Steel Tripod and Grounding
Kit (15 ft)
- CM120:Stainless Steel Tripod and Grounding
Kit (20 ft)
- CM202:2 Ft Sensor Crossarm (includes
CM210 Mounting Kit)
- CM204:4 Ft Sensor Crossarm (includes
CM210 Mounting Kit)
- CM206:6 Ft Sensor Crossarm (includes
CM210 Mounting Kit)
- CM210:Mounting Kit (attaches Crossarm
1-1.5" O.D. to vertical pipe 1-2.1" O.D.)
- CM220:Right Angle Mounting Kit (attaches
one sensor to Crossarm; 1-1.5" O.D. both horizontally and vertically)
- CM230:Adjustable Angle Mounting Kit (for
antennas and direction-sensitive devices; 1-1.5" O.D. horizontally; 1.3-2.1" O.D.
vertically)
- CM225:Pyranometer Mounting Stand (1-2.1"
O.D. both horizontally and vertically)
- L1049:1 Inch x 3/4 Inch NU RAIL (attaches
one sensor to Crossarm)
- L17953:1 Inch x 1 Inch NU RAIL (attaches
one sensor to Crossarm)
- L19192:Tripod Tote for Stainless Steel
Tripod
- L19241:Extension Kit to Add 5 ft to a
Stainless Steel Tripod
- L19239:Tripod Guy Kit for CM110
- L19282:Guy Extension Anchor Kit for Stainless
Steel Tripods
Towers and Sensor Mounts
- UT10:10 Foot Tower with Hinged Base, Adjustable Mast & Grounding
Kit
- UT30:Universal 10 Meter Tower & Adjustable
Mast
- B18:Universal Tower Concrete Mounting
Base
- RFM18:Universal Tower Flat Roof Tower
Mounting Base
- UTGND:Tower Grounding Kit
- UTGUY:10 meter Tower Guy Kit
- UTDUK:Three Duckbill Anchors for Guy
Wires and one Drive Bar
- UTEYE:Three Eyebolt Anchors (for concrete)
for Guy Wires
- 019ALU:Aluminium Crossarm Sensor Mount
- L7515:10 Meter Aspirated Shield Mount
- CM375:10 m Mast with Base, Guy Cables,
and Grounding Kit
|
|
