|
|
Leica IPAS Freebird, the new generation of Leica Geosystems leading IPAS GNSS-IMU
processing software, sets new standards in efficient data acquisition and accurate
image georeferencing.
Economize your data acquisition by allowing tighter turns Leica IPAS Freebird no
longer requires a continuous lock of satellites. Leica IPAS Freebird frees up your
mission planning because it allows much tighter turns between flight lines. The
results are up to 25% improvement in flight economy for sensor missions and several
minutes of time savings per turn.
Simplified GNSS-IMU processing in one step
|
Leica IPAS Freebird offers the easiest way to achieve accurate image georeferencing
by using GNSS raw meas-urements and tightly coupled GNSS-IMU processing in one step.
Previously, GNSS-IMU processing for accurate image georeferencing required two steps:
In a first step, GNSS trajectory was processed using GrafNav/GrafNet software. This
required a continuous lock of 5 or more satellites. In a second step, IPAS Pro blended
the trajec-tory with the IMU data.
|
Now, the all new Leica IPAS Freebird with IPAS TC allows you to combine those steps
into one by using GNSS raw measurements and tightly coupled GNSS-IMU processing.
Leica IPAS Freebird not only saves you time, it really saves you money. And best
of all: it comes standard with all Leica Geosystems imaging and LIDAR sensor systems.
Performance Indicators:
- Up to 25% improvement in flight economy for sensor missions
- Allows sharper turns between the flight lines - does not require
continuous lock of satellites
- Saves several minutes of time per turn
- GNSS-IMU post processing is simplified and faster
- Precise Point Positioning - solutions without GNSS base station data
- Standard with all new Leica Geosystems imaging and LIDAR platforms
|
Flight without Leica IPAS Freebird
|
Flight with Leica IPAS Freebird
|
Downloads:
|
