ENC 6/8

6" x 8" White Fiberglass-Reinforced Enclosure with Mount (suitable for a CR200/205 with a BP2.9 power supply)

General Description

Campbell Scientific provides fiberglass-reinforced polyester enclosures for housing our dataloggers and peripherals. These non-corrosive, white enclosures are UV-stabilized and reflect solar radiation, reducing temperature gradients inside the enclosure without requiring a separate radiation shield. Dataloggers and peripherals housed in an enclosure with desiccant are protected from water and most pollutants.

The NEMA 6P enclosures (modified by conduit) include a door gasket, external grounding lug, stainless steel hinge, lockable hasp, desiccant, humidity indicators, and sensor cable ties. The housings attach either to a flat surface, vertical mast (1" to 1.25" IPS Schedule 40 pipe; O.D. 1.315" to 1.660"), tripod, or tower.

Dataloggers, peripherals, and brackets are mounted on an internal backplate punched with a grid of one-inch-on-center holes. This mounting scheme simplifies system configuration and facilitates addition and removal of equipment in the field.

ENC 12/14

12" x 14" White Fiberglass-Reinforced Enclosure (suitable for a CR1000 with a PS100 power supply and one or more peripherals)

Features

• Dimensions: 12.0" x 14.0" x 5.5" (30.5 x 35.6 x 14.0 cm)
• Houses one CR200-series, CR800, CR1000, or CR3000 datalogger, power supply, and one or more peripherals
• Cable entry options:
  • One sealable conduit
  • Two sealable conduits
  • Six individual cable entry seals and vent to atmosphere
  • No cable openings

• Optional Mounting Brackets:
  • Tower or Mast mounting options available.
  • Leg mounting option available.

General Description

The ENC 12/14 is our medium-sized enclosure. It can house one CR200-series, CR510, CR10X, CR800, CR1000, or CR3000 datalogger, and one or more peripherals (depending on peripheral's footprint).

ENC 16/18

16" x 18" White Fiberglass-Reinforced Enclosure (suitable for a CR1000 with a PS100 power supply and several peripherals)

Features

• Dimensions: 16.0" x 18.0" x 9" (40.6 x 45.7 x 22.8 cm)
• Houses one CR200-series, CR800, CR1000, CR3000, or CR5000 datalogger datalogger, power supply, and one or more peripherals
• Cable entry options:
  • One sealable conduit
  • Two sealable conduits
  • Six individual cable entry seals and vent to atmosphere
  • No cable openings
• Optional Mounting Brackets:
  • Tower or Mast mounting options available

General Description

Our general use enclosures are intended to accommodate a datalogger, power supply, and at least one peripheral. We typically refer to our enclosures by their internal dimensions (in inches). The ENC 16/18 series enclosures are recommended for applications that need to have multiple communications or measurement and control peripherals housed in the same enclosure.