• Design and data manipulation
• Control establishment
• Base Station set-up (or use network corrections)
• GNSS rover solutions (set-out and as-built checks)
• GNSS foreman car/quad navigation
• GNSS machine control (more machines types)
• Tracker machine control (more machines types)
• Total station work (set-out and as-built checks, one man, two man options available)

All controlled by the same simple user interface designed specifically with the construction site in mind.

Leica PowerTracker
Leica PowerTracker brings industry leading performance and technology to you in a simple, easy to use, versatile package. Using Leica PowerTracker will increase jobsite productivity and improve accuracy from the moment you switch it on.

Leica PowerTracker is a highly accurate robotic tracking sensor, which is the perfect tool for all your construction positioning needs. From stakeout, to machine control, to as-built verification Leica PowerTracker is the ideal sensor to get the job done right the first time. Designed specifically with the construction site and the construction user in mind, simply level the Leica PowerTracker and GO. With no keyboard on the sensor and an extremely intuitive user interface, all users will be up and running in no time.

• Simple to use:
  - No keyboard (Level and Go functionality)
  - Powerful easy to use software
  - Use one controller for many tasks
• Market leading performance
  - PinPoint Reflectorless mode
  - Power Search (Patented Search technology)
  - High accuracy static and dynamic modes
  - Superior tracking performance
  - High measurement frequency
  - High accuracy prism and accessories
• Save Money
  - Modular system design (pay for what you need)
  - Upgradeable as you grow
  - Work under any site conditions (rain, wind, snow, sun, underground, in canyons, steep slopes .)

Leica PowerAntenna
Whether your machine needs a GNSS position or heading, your site base station needs simplest "turn on & go" or your supervisor needs to check grade with his 4-wheel drive then stake out a manhole in the next minute ? the Leica PowerAntenna can do the job.

Leica Geosystems' cutting edge technology is your gateway to greater efficiency.

The key to productivity!

• Scalable GNSS
  - upgradeable as you grow (pay for what you need)
• Versatile System
  - suits many applications (pole, base, machine, supervisor, …)
  - extendable to dual GNSS
  - Stake-out / Grade Check
  - choose from a wide range of communication devices
  - use one controller for many sensors
• Bluetooth® for cable-free communication
• Superior GNSS Leica Geosystems Technology
• GLONASS enabled for better Satellite coverage

Leica PowerBox
Leica PowerBox GNSS Receivers usher in a new dimension in performance and versatility for your construction site.

Leica PowerBox is a scalable position system, that can grow with your need. GLONASS, Networking, update rate and base station use, can all be configured to provide a tailored solution for your needs.

• Scalable GNSS Receiver – various upgrade possibilities (pay for what you need
)
• Versatile System
  - Single Position
  - Dual Position upgradeable by adding a SmartAntenna
  - Dual Position by adding second Leica PowerBox for Heading in extremely harsh environment
• Automatic recognition of single or dual antenna
• On-machine GNSS Positioning for all conditions and machines
• Off-machine GNSS receiver as Site Base Station or site supervisor’s vehicle
• Latest Leica Geosystems Technology – High Performance -> high reliability -> higher productivity
• GLONASS enabled for better Satellite coverage

Leica PowerController
One easy-to-use control unit for all sensors

• The first tool, that allows all construction site staff access to digital design 
• Display design files from the project engineers anywhere on site 
• Windows CE device 
• With removable CF Card for easy data transfer and with extended data storage 
• Simple user interface that allows non-specialists to set-up GPS/GNSS base stations or total stations

Leica Basic Digging Systems
Leica Basic Digging System (former Leica MC200 Depthmaster) is an ideal tool for any kind of height control for Excavators. Simply turn the excavator dipper into an integrated measuring stick without having to leave the cabin. It is simple to set-up and can be used with any rotating laser.

Machine Control Receiver with patented plumb indicator:

• Constant Accuracy Band Control
• Magnetic or bracket mounted
• Patented plumb indicators
• Ultra-bright LED displays (front & back)
• Self-contained rechargeable battery pack
• 100 % waterproof
• "Shake 2 wake" functionality

Leica PowerDigger Lite
Leica PowerDigger Lite is a simple, economic excavator control system. It is perfect for backhoes and mini excavators and is the ideal solution for contractors who want to enter into machine control. The single slope control box with multicolour display is easy-to-use and is specifically designed for standard excavating applications.

The graphical overview on PowerDigger Lite gives you information of the exact height and slope you have keyed in. All buttons and necessary functions are placed logical on the front for straightforward operation. The PowerDigger Lite offers you the flexibility to work with an existing height or Laser reference.

The PowerDigger Lite system saves you time and money as you get your job done faster and it eliminates over excavation and downtime to make grade level checks. Difficult tasks as blind cuts or digging under water are far easier with the system as you see the bucket position on your control box display at any time.

System features

• Accurate single slope and depth control
• 3.5" Colour graphic display
• Simple menu structure - very easy to use
• Remote display supported
• 100 % waterproof (IP68) – no special sensors or cables needed for underwater use
• You can offset your reference surface

Benefits

• Increase machine productivity
• Graphical cut/fill indication in the cab
• Be your own surveyor and save money
• No more over excavations
• Get done in fewer passes
• Increase safety on site. Audio and on-screen warning of buried services with connected EZiDIG sensor (available option)
  

Leica Basic Grading Systems
The Leica PowerBlade system is a complete solution steered by the MCP-700 Control Box – easy-to-use and full of features. A choice of Laser Receivers allows you to tailor the system to your application. An extremely rugged Electric Mast and a variety of hydraulic options complete the system.

Versatile, Durable and Smart

• Designed for advanced agricultural land leveling (survey capability, automatic averaging, lift functionality) Fully equipped for operating Dozers with best results
• Variety of hydraulic valves can be operated and tuned (black/white, proportional, Danfoss)
• Choice of manual or automatic level control of the machine
• Very quick learning curve due to simple user interface
• Very bright LED display that can be read even in strong direct sunlight
• 360° capture range in 190 mm (8”) window with any MD Laser Receiver
• Proportional detection gives you the accuracy exactly where you need it
• 2,5 mm (1/10”) accuracy independent of laser beam width
• Works with all types of lasers
• Choice of measurement units (metric, US feet, US inches)

Leica PowerGrade
Leica PowerGrade will revolutionize your construction process. It not only boosts your productivity and performance, it also offers unmatched flexibility and upgradeability.

The key to the Leica PowerGrade system lies in our unique PowerSnap™ concept – a single docking station allowing easy and quick exchange of panels, depending on the job you need to do. Just snap the control panel into place and get to work.

Key Benefits

Increased productivity

• Maximises your machine utilisation and return-on-investment from day one, by getting right to grade the first time
• Save time, setup and go in minutes. PowerGrade system remembers all your settings

Increased flexibility

• Unique Snap-on & Snap-off capability
• Easy removal of key components for overnight security.
• Fully scaleable from basic 2D entry system to full 3D capability. Laser, slope, sonic, GPS and total station control options

Reduced costs

• Faster job cycles reduce operating costs
• Reduce labor costs by reducing or eliminating grade checks, and getting to grade faster and uniformly

Leica PowerGrade 3D
Leica PowerGrade 3D will revolutionize the way you move dirt and fine-grade. It not only boosts your productivity and performance, it also offers unmatched flexibility.

Key Benefits

• Increased productivity
  Maximises your machine utilisation and return-on-investment from day one, by getting right to grade the first time
  Save time, setup and go in minutes. PowerGrade system remembers all your settings
• Increased flexibility
  Unique Snap-on & Snap-off capability
  Easy removal of key components for overnight security. One docking station for all panels
  Fully scaleable from basic 2D entry system to full 3D capability in the same control panel. Laser, slope, sonic, GPS and total station control options
  Simple upgrade step to 3D – buy a 3D-ready panel and upgrade later or rent the GPS/Tracker and 3D software only when you need it
• Reduced costs
  Faster job cycles reduce operating costs
  Reduce labor costs by reducing or eliminating grade checks

Leica SP Technology

With the SP technology your grading work with a bulldozer shifts into higher gear and will become smoother and more consistent than ever before. The new SP technology from Leica Geosystems is designed to make grading with dozers more productive. And it does, many times over.

Grading at higher speeds
PowerGrade with SP allows you to work twice as fast as before. Your jobs will be finished much faster, needing less heavy equipment on the site, and your machines are available sooner for the next project. Providing an improved hydraulic control, SP can dramatically increase the productivity, machine utilization and optimizes material usage on any earthmoving and fine-grading project. This will reflect in your bottom line.

Highly accurate, smooth results
By using inertial guidance with the most responsive hydraulic control on the market, GPS performance is significantly enhanced. Dozers equipped with SP technology provide extremely precise and consistent grading results at previously unthought of speeds and on virtually any surface. You can use your dozer for finish work that normally you had to have a grader for!

Key benefits of SP Technology

• Fine grade with your bulldozer in 3rd gear
• Maintaining grading smoothness and accuracy at increased speed
• Increases machine uptime (e.g. work through momentary GPS outages)
• Higher sensor availability with GNSS/GPS
• Unmatched productivity that boosts your profitability
• Reach target grade in less time 

Leica Basic Paving Systems

Asphalt Paver Control System with ultrasonic, laser and slope

• Works as stand-alone system
• Complete system with Cross slope
• CAN Bus System
• Expandable for Leica 3D solutions

Leica PaveSmart 3D for Curb & Gutter

Leica Geosystems' revolutionary PaveSmart 3D for Curb & Gutter.

Leica Geosystems' PaveSmart 3D for Curb & Gutter eliminates the need to set stringline for any kind of offset concrete paving application and gives you total jobsite flexibility and mobility. Fully automatic grade and steer control using 3D sensor technology means you can pave exactly
where and when you want to, not where you're forced to. Free yourself up from the cost and
inflexibility of strings, stakes & hubs.

The 3D solution

• Eliminates the cost, potential for errors and logistical problems with measuring from hubs, installing and interpolating pins, setting and checking lines and removing it all after paving
• Leica PaveSmart 3D uses computerised project design files, straight from the architect’s CAD system
• Hundreds of projects – anything from simple one-off jobs to complex subdivisions – can be stored in one system
• Full 3D graphics allow you to see where you are, where you’re going, and verify there are no problems with the project design before you pave
• Pave any curb, monolithic or barrier profile with pinpoint accuracy
• Bid lower than your stringline-based competitors and win more contracts.

The Benefits

• Fully automatic all-track grade and steer
• Puts the project plans directly on the machine
• Puts operators in control of their own work
• Simultaneous trim-and-pour capable
• All the information your operator needs at-a-glance
• Uses Leica Geosystems world-leading 3D sensor technology
• Data can be imported from almost any CAD design system
• Compatible with the widest range of GPS base stations
• The result of 10 years research, development knowledge and experience from the world’s first provider of stringless concrete paving technology
• One supplier, one integrated solution